SH0702 진공압 40kPa의 연료유 전체 퇴적물 결정 방법
| Key Words: | Fuel Oil Total Sediment Determination Method |
|---|---|
| Waste Flask Capacity: | 500ml |
| Test Sample: | 25g |
전문적이고 정확한 디젤 연료 테스트 장비 0.5% M/m 테스트 범위
| Product Name: | Diesel Fuel Testing Equipment Residual Fuel Oil Total Sediment Analyzer ASTM D4870 |
|---|---|
| Vacuum pressure: | 40kPa |
| Waste Flask Capacity: | 500ml |
500ml 폐기물 병 용량 ASTM D4870 전력 1000W의 전체 퇴적 분석기
| Filter paper: | aperture 0.0016mm, diameter 47mm |
|---|---|
| Vacuum pressure: | 40kPa |
| Test Sample: | 25g |
전체 퇴적물 결정 방법을 위한 첨단 디젤 연료 시험 장비
| Applicable standards: | SH/T0701 SH/T0702 ASTM D4870 |
|---|---|
| Net weight: | 36KG |
| Product Name: | Diesel Fuel Testing Equipment Residual Fuel Oil Total Sediment Analyzer ASTM D4870 |
00.5% M/m 테스트 범위 잔류 연료 기름 총 퇴적 분석기 500ml 폐기물 병 용량
| Standard: | ASTM D4870 |
|---|---|
| Key Words: | Fuel Oil Total Sediment Determination Method |
| Vacuum pressure: | 40kPa |
25W 혼합 모터를 가진 디젤 연료의 증발 손실 측정 장비
| Temperature Control Accuracy: | ±0.5ºC |
|---|---|
| Mixing Motor: | 25W |
| Product Name: | Diesel Fuel Testing Equipment ASTM D972 Lubricating Oils And Greases Evaporation Loss Tester |
혼합 모터 25W 및 흐름 미터와 함께 정확한 윤유 / 지방 증발 손실 검사기
| Product Category: | Diesel Fuel Testing Equipment |
|---|---|
| Product Name: | Diesel Fuel Testing Equipment ASTM D972 Lubricating Oils And Greases Evaporation Loss Tester |
| Standard: | ASTM D972 |
방 온도 260 oC 조절 가능한 디젤 연료 시험 장비 ASTM D972 표준
| Suitable for: | Measuring the evaporation loss of lubricating oil or grease at any temperature of 99 ~ 200℃ |
|---|---|
| Standard: | ASTM D972 |
| Product Category: | Diesel Fuel Testing Equipment |
윤활유 및 지방 증발 손실 검사기 ±0.5oC 온도 조절 정확도
| Product Category: | Diesel Fuel Testing Equipment |
|---|---|
| Standard: | ASTM D972 |
| Temperature Range: | Room Temperature ~ 260 ºC Adjustable |
ASTM D972 디젤 연료 시험 장비 ±0.5oC 온도 제어실 온도 260 oC 조절
| Timing Device: | 0 ~ 100 Hours |
|---|---|
| Temperature Control Accuracy: | ±0.5ºC |
| Product Features: | Composed of bath, temperature control meter, air pump, flow meter, temperature control circuit and so on. An air pump and a flowmeter are used to inject air into the sample in the evaporation test device in the constant temperature bath at a quantitative f |